24V 50cm length Alustripe Custom Circuit Board Assembly Rigid LED Strip with Code white LEDs

50cm Alustripe with 42 MidPower LEDs 10000K Assembled with 36 cold-white and 6 royal-blue LEDs

Description

The 50cm 24V aluminium core PCBs are assembled with 36 OSRAM Duris E5 and 6 royal-blue MidPower LEDs. Perfrect for marine aquarium applications.

Usage is as easy as possible: Simply connect them to 24V constant voltage and that's it! We recomment our 50cm Glue tape , for perfect thermal transfer to heat-sink.

Successful usage of high power LEDs:

Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

Technical Data

Detailed Terms for PCB Assembly